Steve,
If you are having issues there are two ways to save them.
1 from the que right click and optimize it. it will change the name a little and you will have a vector optimized file. It will typically run faster also.
2. you can save the file to an archived file. just go to the File menu and save plate. I use this to save repeatable job setups so they don't take up memory in the que.
I am posting this from home so I don't have the actual name of the function in the right click menu in the que. If you have any questions, I can check it tomorrow.
Hope this helps and ...
Have a Blessed day,
Michael Kowalczyk
Laser-Trotec Speedy II 60 watt with 9.4.2 job control and will soon upgrade to JC X
Corel Draw Suite X6, FlexiSign Pro 8.62, AI CS3 and Lasertype6
CNC Routers-Thermwood model C40 with 4th axis. Thermwood Model 42 with dual tables and dual spindles with ATC for high production runs,
ArtcamPro 2010_SP4, EnroutePro 5.1, BobCad v21 & v24, Aspire v8 and Rhino 5.
FOTC link
http://www.sawmillcreek.org/friends.php?cp=210&lp=0&t=0&q=