Problem has been resolved I would like to thank everyone for their help.
Bob
Problem has been resolved I would like to thank everyone for their help.
Bob
Last edited by Robert Gauntt; 04-12-2014 at 1:50 AM.
New machine? My guess... its either asking to be connected to the machine to verify you own one before you can use the software OR your machine came with a little white USB dongle that the software wants to see plugged into your computer before it loads the software.
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10
Hi Bill, its a used machine and the USB dongle was in the computer. Do you have any idea's what I can do.
Hi Keith, I had the USB cable connected to the computer and machine as well as the USB dongle.
Robert,
I believe there is a separate driver for the SoftDog and there may even be a specific order to install it. Initial setup on a LaserCut-driven system is definitely a pain. If you're still having problems, I should have more info by the end of the weekend as I've upgraded my shop computer to Win 7 and hope to install Corel Draw and the LaserCut software this weekend (and I WILL be taking good notes this time!!!).
Roy
_______________________________
G.Weike 80W LG900N 600x900mm laser
LaserCut 5.3, CorelDraw 12, Inkscape, TurboCAD 19
Homemade 3-axis 18x51" CNC router
Vectric Aspire 8, PhotoVCarve, Mach 3
EurekaZone track saw system
Hi Bill, I got it to work I kept playing with the dongle and it works. Now I'm not sure if I should take it out or just leave it in. If I take it out it might not work again. I wonder if you could just buy a dongle for laser cut 5.3 just for a backup. I appreciate your help in the matter as well as everyone else for their help.
Hi Roy,
As I just told Bill after me putting it in and out a hundred times it finally worked. Wondering if you could buy just a dongle just for a backup and what it would cost. Good luck with your installs I hope everything goes smoothly. Thanks for the reply I appreciate it.