Hi all!
I've been messing around with styrene and haven't been having much luck. I'm working with 1/16" thick and it's more melting that cutting or rastering. I've experimented with changing up the power and speed with pretty much all the possible combinations (low speed, high power / high speed , low power / high speed, high power / low speed , low power) and regardless of what I try it just doesn't come out clean.
I am trying to do some fairly detailed stuff, but I also have a 40mm lens. I was thinking that a 30mm might be something to try but before I ordered one I wanted to see if anyone has had any success even working with styrene on a laser, as I'm starting to think that I might need to abandon this project (or at least this version of it).
Thanks!