Hi there,
new to the forum and fairly new to laser engraving & cutting.
I own a lasermaster L20, really enjoying this machine and the cutting/engraving it can do, however I have one issue I have not been able to resolve regarding the X & Y axis movement.
When engraving images the machine sweeps back and forth producing the image as it should, however it sweeps backs and forth on it's X-axis, it would be much easier on the machine to sweep back and forth on it's Y-axis (in any engraving demos I have watched I have also noticed the machines always working from the Y-axis).
If anyone knows how I can change this so the machine sweeps on the Y-axis, any ideas or help are hugely appreciated!
Thank you for reading.