First time posting but have seen a lot of knowledge go by!
Rebuilt a WT 14" a few years ago and works well but tension bottoms out. Expect I need a new/ stiffer spring. Does anyone know original specs or what works?
Frank
First time posting but have seen a lot of knowledge go by!
Rebuilt a WT 14" a few years ago and works well but tension bottoms out. Expect I need a new/ stiffer spring. Does anyone know original specs or what works?
Frank
No, but I had a similar issue with my old BS and I put a metal spacer between the adjuster screw and the frame for some extra tension.
Just measure length, OD and ID and get a replacement from Iturra. you have call him, no website. Dave
See if a Carter Cobra Coil will fit. It will give you about 14,000-16,000 psi. Your OEM spring is probably 8500-11,000 psi
"The first thing you need to know, will likely be the last thing you learn." (Unknown)
Have you tried searching on owwm? There are guys there can help you out with old machinery. Try cross referencing too.
Do you need a spring or a shorter length blade?