For those of you that have worked with PVC board, what kind of paint are you using on it, to get it to stick?
This is not Trex. This is called PVC board, and locally I can only get it at Lowes.
For those of you that have worked with PVC board, what kind of paint are you using on it, to get it to stick?
This is not Trex. This is called PVC board, and locally I can only get it at Lowes.
Wow...I feel stupid. That should have been an easy find for me.
Thanks Adam.
I use Sherwin Williams adhesion promoting primer, brown can, not blue, followed by Grahams Ceramic top coat. Lightly sand surface to create small scratches for better adhesion.
Larry
I recently made a mail box out of PVC and simply did a light sanding and wiped it down with Acetone and painted it with a good grade of latex paint. So far so good.
mail box 011 (600x800).jpg