http://youtu.be/9rBnCf2Zuzc
used mahogany plywood to cut these parts 60% power .60 speed took about 10 min for the whole project
interesting design
http://youtu.be/9rBnCf2Zuzc
used mahogany plywood to cut these parts 60% power .60 speed took about 10 min for the whole project
interesting design
I love eccentric gear designs... and the fact that this one looks like a Nautilus is icing on the cake.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
That is neat.
Rabbit RL-80-9060
Roland SP-540i
Graphtec ce5000-60
Graphtec fc7000-100
Happy HDC2-1501
Juki 1541s
it was interesting that it worked
that is neat. any chance you would shared the corel file? thanks chad
Chad Fitzgerald
Hickory Grove Cabinetry
Custom Woodworking/Laser Engraving
Laser Pro Spirit 40W
ShopSabre RC4 CNC
55x49 cut area
with 3 1/4 PC Router, 10" Z
Nautilus gear drawings is on thingiverse but in STL files. Looking for a converter now.
Rabbit RL-80-9060
Roland SP-540i
Graphtec ce5000-60
Graphtec fc7000-100
Happy HDC2-1501
Juki 1541s
its not corel its a 3d file SolidWorks Assembly Document (.SLDASM)
also i don't know how to upload it ,computer will not even in a*.rar format
Last edited by stan kern; 09-22-2013 at 1:38 PM.
Haven't looked at it since I don't have the right SW on this computer, but there's a DXF here: http://www.thingiverse.com/thing:27233/#files
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
They just did the one piece a dxf, the other needed files are STL. These guys are making these on 3D printers.
Rabbit RL-80-9060
Roland SP-540i
Graphtec ce5000-60
Graphtec fc7000-100
Happy HDC2-1501
Juki 1541s
the download is good ,just make 2
Another possibility:
Nautilus Gear motorised display cdr, pdf and mts using bamboo barbecue skewers as axle
also uses the flexible hinge for the box
http://www.thingiverse.com/thing:94608
Thanks Bruce, nice find . . gotta try this one. Looks like fun. Vicki
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.
Nautilus_display-14.cdr
Hope this works, Lee.
Thanks...I'll see how it goes when I get it upstairs. I find it odd that my X4 doesn't display any errors when trying to load an X5/X6 file, it just hangs.
Yoga class makes me feel like a total stud, mostly because I'm about as flexible as a 2x4.
"Design"? Possibly. "Intelligent"? Sure doesn't look like it from this angle.
We used to be hunter gatherers. Now we're shopper borrowers.
The three most important words in the English language: "Front Towards Enemy".
The world makes a lot more sense when you remember that Butthead was the smart one.
You can never be too rich, too thin, or have too much ammo.