Hello creekers, I have a small problem, not too major, just frustrating because I like things to work when they say they should.
I have a G0514x2 19" Grizzly Bandsaw. I have 1/2", 3/4", and 1" blades that track perfectly fine with very little adjustment between each.
I just bought a Timberwolf 1/8" blade for it and can't get the darn thing to track straight to save my life. I have spent 4 hours on it, tensioning, retensioning, tracking, retracking, adjusting here, adjusting there, etc...
Should I just chalk it up to being too small of a blade even though Grizzly says it will take a 1/8" blade? I'm looking to cut some curves, mainly small letters about 3 to 8 inches tall for the wife. Would a 1/4 or 3/8 blade work good for that and maybe track better? Use to use a 1/8 blade on my old 14" Rigid with no problem. Pretty new to this big beast of a bandsaw.
Thanks in advance for any help.