Hello All,

I was looking at adding a dust collector to a small garage shop I am putting together. I noticed that Grizzly switched to an aluminum impeller on the G1028z2. Would this be a concern ? I have read some threads concrning cracked aluminum impellers, but was not sure how common this could be. I plan on adding a SSD down the road, but I will not have a pre-seperator for a while.

I have also looked at the Rikon 60-200 and the PSI DC2V3. These have the steel impellers. I am restricted to 120v and trying to keep the top price around $400.

Thanks in advance.

Jason