I got a call from the tree trimmers yesterday, so this morning I dropped off my trailer on the way to work. I went by after work to pick up the trailer and load up the truck, but the trailer wasn't loaded yet so I just loaded up the truck with some acacia.
One of the pieces was a small limb, so after I sealed the logs and unloaded the truck, I cut off a section of the log and decided to turn a little hf to give to the tree trimmers when I pick up the trailer.
The limb was only about 4 1/2" in diameter, so there's lots of sapwood. For a hardwood, it turns really nice when it's fresh cut and hollowing was a breeze.
It's 5" x 3 3/4" with just a coat of antique oil.
PICT0002.JPGPICT0001.JPG
Thanks for looking!
Comments and critiques are welcome.