Results 1 to 14 of 14

Thread: Corian Supplier needed Pre Cut pieces

  1. #1
    Join Date
    Apr 2009
    Location
    Detroit suburbs, Michigan
    Posts
    137

    Corian Supplier needed Pre Cut pieces

    I have searched for information on this Forum but only found some very old posts.

    I am looking to purchase some pieces of 1/2" Corian in say 12" by 12" squares. Can anyone suggest a source for these?

    At this time, looking for about 6 to 12 pieces.

    Thanks for your help!
    Epilog 45 watt, Graphtec cutter-plotter, Corel Graphics Suite X3 - X4, HP and Vaio computers, woodshop.

    "Trust, but Verify"

  2. #2
    Join Date
    Jan 2011
    Location
    Arlington, WA
    Posts
    2
    Hi Don,

    I've used solidsurface.com. Not sure if they will cut it down to the exact size, but they have a good selection of overstock, partial sheets and remnants. Also try ebay.

    John

  3. #3
    Join Date
    Apr 2009
    Location
    Detroit suburbs, Michigan
    Posts
    137
    Thanks John, appreciate the information.
    Epilog 45 watt, Graphtec cutter-plotter, Corel Graphics Suite X3 - X4, HP and Vaio computers, woodshop.

    "Trust, but Verify"

  4. #4
    Join Date
    Feb 2003
    Location
    Doylestown, PA
    Posts
    7,577
    Have you talked to kitchen fabricators in your area? They might be willing to sell smaller chunks.

  5. #5
    Join Date
    Apr 2009
    Location
    Detroit suburbs, Michigan
    Posts
    137
    Curt,

    I am in a rural location and have not had any luck with kitchen fabricators.
    Epilog 45 watt, Graphtec cutter-plotter, Corel Graphics Suite X3 - X4, HP and Vaio computers, woodshop.

    "Trust, but Verify"

  6. #6
    Join Date
    Mar 2003
    Location
    Monroe, MI
    Posts
    11,896
    Ken Craft Company in Toledo sells drops but they have what they have color-wise.


  7. #7
    Join Date
    Apr 2009
    Location
    Detroit suburbs, Michigan
    Posts
    137
    Thanks Matt,

    Next time I am in the Detroit area I will run down there.
    Epilog 45 watt, Graphtec cutter-plotter, Corel Graphics Suite X3 - X4, HP and Vaio computers, woodshop.

    "Trust, but Verify"

  8. #8
    Join Date
    Apr 2009
    Location
    Detroit suburbs, Michigan
    Posts
    137
    Brian R.

    Sent you a PM.
    Epilog 45 watt, Graphtec cutter-plotter, Corel Graphics Suite X3 - X4, HP and Vaio computers, woodshop.

    "Trust, but Verify"

  9. #9
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    14,778
    http://www2.dupont.com/corian/en-us/...ll-colors.html

    Select the color you like then you can order a sample from Dupont.
    The 10" square sample of Arctic Ice is $13.50

    A bit pricey but its an option.

    I have found free Corian pieces from some local top fabricators and I have found some fabricators that sell their project drops. The last time I purchased drops a 30" by 36" piece of solid black (nocturnal) was 50 bucks.
    .

  10. #10
    Join Date
    Mar 2005
    Location
    Gig Harbor, WA
    Posts
    1,157
    Looking for Sink Cutouts......

    Michigan
    Dealers Address City St. Zip Phone
    R.A. MORT'S BATH GALLERY 2260 M-139 BENTON HARBOR MI 49022 269/927-8288
    MILTONS CABINET SHOP 10331 OLD US 31 BERRIEN SPRINGS MI 49103 269/473-2743
    BLISSFIELD LUMBER & INTERIOR 10007 EAST US-223 BLISSFIELD MI 49228 517/486-3666
    FULL CIRCLE HOME CENTER 119 N F STREET CHEBOYGAN MI 49721 231/627-6535
    CARTER PLUMBING & ELECTRIC 7474 ALPINE AVE NW COMSTOCK PARK MI 49321 616/784-3830
    41 LUMBER 6669 US 2 & 41 ESCANABA MI 49829 906/786-3883
    IVERSONS KITCHEN CENTER 905 N LINCOLN RD ESCANABA MI 49829 906/789-7480
    PERK'S CABINETRY 822 1ST AVE NORTH ESCANABA MI 49829 906/786-4603
    RODMAN HOME & KITCHEN SPCLIST 938 STANLEY CT ESCANABA MI 49829 906/786-1012
    ROY NESS CONTRACTING & SALES 1801 N. LINCOLN RD ESCANABA MI 49829 906/786-2254
    SCHWALBACH KITCHEN SPECALITST 1009 LUDINGTON STREET ESCANABA MI 49829 906/786-3780
    SMITH LUMBER COMPANY 309 WEST MAIN STREET HARTFORD MI 49057 269/621-2496
    LAKESHORE CUSTOM CABINETS 60 E LAKEWOOD BLVD. HOLLAND MI 49424 616/395-5490
    HANNAPEL HOME CENTER 370 NORTH 9TH STREET KALAMAZOO MI 49009 269/372-0340
    CARTER LUMBER 2323 W US HIGHWAY 10 LUDINGTON MI 49431 800/523-7737
    STANDARD KITCHENS 5151 WEST US 10-31 LUDINGTON MI 49431 231/843-3395
    WEINLANDER KITCHEN & BATH 15515 SOUTH MONROE ST MONROE MI 48164 734/457-3570
    DISCOUNT HOME IMPROVEMENT 577 WEST SHERMAN BLVD MUSKEGON MI 49444 231/830-1000
    HANNAPEL HOME CENTER 8800 SHAVER RD PORTAGE MI 49002 269/323-0660
    BIG L LUMBER 620 S MAIN ST SHERIDAN MI 48884 989/291-3232
    NOWAK CABINETS, INC. 11744 US 31 S WILLIAMSBURG MI 49690 231/264-8603


    Corian Countertop Holland MI

    Granite Countertops Inc. Grand Haven, MI
    Mark
    In the Great Northwest!

    Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
    Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw

  11. #11
    As of today, the Dupont site now is charging $23.50 for a 10x10 sample, up from $13.50 recently.

  12. #12
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    14,778
    Now that's a price increase!!!
    I doubt that I will be purchasing samples from Dupont ever again.
    .

  13. #13
    Join Date
    Mar 2011
    Location
    Corona de Tucson, AZ
    Posts
    30
    Take a look a EBAY, we've purchased a few time from a guy in Bronx, NY. He typically sells 6- 10 x 13 pieces for $9 plus shipping. His ID is "tpd396". He has filled requests also.
    40W GWeike, 60W GWeike LG500,
    CNC Shark Pro, VCarve Pro 7
    CorelDraw X6
    Ricoh SG3110DN, Geo Knight DC16

  14. #14
    PDU is now selling "Solid Surface Plaques" under Acrylistone or a name similar to that.
    Martin Boekers

    1 - Epilog Radius 25watt laser 1998
    1 - Epilog Legend EXT36 75watt laser 2005
    1 - Epilog Legend EXT36 75watt laser 2007
    1 - Epilog Fusion M2 32 120watt laser with camera 2015
    2 - Geo Knight K20S 16x20 Heat Press
    Geo Knight K Mug Press,
    Ricoh GX-7000 Dye Sub Printer
    Zerox Phaser 6360 Laser Printer
    numerous other tools and implements
    of distruction/distraction!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •