new design for bottle box

[walter hofmann]

hi all
I thought I post my latest design for a wine bottle box what I did for a realestate company as present what they give to there customer.
its cut with my converted K40 from 1/8 inch Homedepot plywood.
this is a big hit and more companys are requesting this box.wineboxdiag.cdr
greetings
waltfl

[Jimmy Phillips]

hi all
I thought I post my latest design for a wine bottle box what I did for a realestate company as present what they give to there customer.
its cut with my converted K40 from 1/8 inch Homedepot plywood.
this is a big hit and more companys are requesting this box.wineboxdiag.cdr
greetings
waltfl

Walter,

Can you show us a finished box?

Thanks!

Jimmy

[Jeff Belany]

Can you post in an earlier version?

[Johnny Anderson]

Version 12

[walter hofmann]

yes I will as soon as I finish the move to the new home.
greetings
waltfl

[bryan henderson]

Can you let us in on an approx. sellingp rice you are getting for these??

Bryan

[walter hofmann]

Hi bryan
the size is 85x85x310mm and I get $45 from the companys who use this as a thank you or promotion present.
greetings
waltfl

[bryan henderson]

Do you happen to have a pictures you can share that are a finished product???

[Duncan Crawford]

Hi, folks

Walter's bottle box got me thinking, so here's a version that's 3.5 x 12.5 inches inside, to fit most 750ml bottles. The lid has a flexible/living hinge, and there's enough room on the front of the lid to engrave either a greeting or perhaps a winery logo. The bird brush art design is cut through, although a simple vector non-through cut or a raster engraving would also work well. I used a 3mm Baltic birch pre-finished both sides with Zinser sanding sealer to give the hinge a bit of lateral stability in heat/humidity-- as when a customer leaves partially open on it's side, it in a bag on the seat of a closed vehicle. <sigh>

On my machine it took 6 minutes to cut, then 4 to glue up/assemble. Would that this PBR town had a decent market for such things. Enjoy :-)

duncan

[Chuck Stone]

Looks good, Duncan!
The only thing I would change (maybe) is to 'roll' the edges on a
belt sander to soften the look of the joints and give a smoother
feel to the box. Like the living hinge on it, too.