[OP]
Contributor
This particular design caught my interest sort of looks medeval,i used white ash 1.75 thick
and it took about 3 hrs total about 1.10 hrs cnc time and the rest sanding .Front and back were machined
I used fstools carbide bits a 1/4 and a 1/2 called RSF2061W-UD2 and RSF2058M-UD2
I maintained a feed rate of 75 in/min down to 36in/min max amps on the router were 9.0
Turned out very well ,sanded up nicely looks like it could rock
http://youtu.be/juVqoFpIRBY
Contributor
Interesting. What are you using for software. I'm Rhino with madCam.
[OP]
Contributor
vetric aspire and a drawing tablet
Contributor
Looks like an old fashioned can opener with a bottle opening accessory.
Guy Hilliard
Sawdust and Noise
Trotec Speedy 400 w 80W, rotary attachment, vacuum table, cutting table, lamella bars
AXYZ 4008 w 7 position ATC, Servos, Vacuum, pins, laser digitizer
CorelDRAW X6,
Rhino 5,
Aspire
Member
Nice work Stan...Gary H...naw dude it's a work of art!
Creative Woodwork and Design
Vector Studio 22
[OP]
Contributor
I did 4 guitar bodies and really enjoyed the creating the toolpaths that everything worked out ,as always the fantastic accuracy
Posting Permissions
Reply With Quote