Hello everyone, I am having an issue with matching a ceiling. I had to replace some of the boards in my ceiling. It is 2x6 tongue and groove. Some type of pine?? I am located approx. 30 miles East of Sacramento. The house was built in the early 70's. The boards probably came from one of the mills that used to be around here. Attached are some pictures of the project. The first 2 show the current ceiling. The next 3 show some of the original ceiling boards. You can see a brown line where the original boards were covered by a beam. My initial attempts were stains that either obscured the knots or were a negative of the existing ceiling. Any thoughts on how to get a close match? Stain, dye, tint? I am open to any and all suggestions. thanks
.DSCN1296.jpgDSCN1294.jpgDSCN1300.jpgDSCN1299.jpgDSCN1298.jpg