Hi all,
On a VLS 3.50 purchased this year, on which direction rotate the screws to adjust the alignment?
There are 3 screws on the support of the mirror # 2 :
- One on the left middle.
- Two on the right (with one on the top and one on the bottom).
I already read this message from Mike Mackenzie :
http://www.sawmillcreek.org/showthread.php?138536-Versalaser-Alignment-Feature&p=1405418#post1405418
"There are three adjustment screws on the back of the #2 mirror the top screw on the right is for UP/DOWN adjustment The lower left screw is for LEFT/RIGHT adjustment. Do not turn the lower right screw this is how it pivots and if you loosen it you could have issues."
But the description of screw positioning does not seem (unless my English is not good enough).
Before making a stupidity thing, I would appreciate any help from those who have already done this.