[OP]
Contributor
Anyone know a source for cursors of different sizes and shapes. I'm making some new stops for a slider and would like to incorporate a clear cursor with a line- glass or plastic, magnifying or not. Would like it to be fairly decent quality as my eyes need more help all the time. Dave
Contributor
You can go on Ebay and look at slide rules. They all have the little lines and many magnify.
Contributor
I use a piece of Lexan (I had it,) scribe a line with either an awl or utility knife. Go over scribe with a sharpie, and wipe off excess. This will leave you a nice sharp VISIBLE line. Learned it from Norm.Originally Posted by David Kumm
Contributor
This is what I did for my Shop Fox Classic fence. 1/4" plastic and 1/4" aluminum.
Administrator
David,
Go to our Friends of the Creek Directory and search on laser engraving. There are a lot of people here who own laser engravers who can easily make these.
.
Guest
That's a nice setup.
Member
SawStop will sell you one from their rip fence for $3.
https://sawstop.3dcartstores.com/Fen...Lens_p_63.html
hero_ICS_CONVENIENCE.jpg
Grizzly too.
http://www.grizzly.com/products/G1023RL/parts/FENCE
Last edited by Kevin Groenke; 10-25-2012 at 9:14 PM.
Contributor
I don't know about the one from Sawstop, but the one from Grizzly sucks. That is why I made my own.
Cary
Posting Permissions
Reply With Quote