I recently got a Lennox bimetal blade for my saw. I was really enjoying the uniform cuts that I was getting on the veneer I was making, even gloating to myself about how long the blade was lasting, when it broke today. I'll definitely try to fix it, but I wonder if other guys have had similar experiences with bimetal blades. My saw is 17" and I was using a 1/2" x 3T x .32 blade. I have broken wider, thicker blades on my saw, but never had a 1/2" blade break.
Here are some questions:
1) Can I use silver solder from the plumbing dept at HD and a propane torch to fix this? I do have brazing experience.
2) Does anyone know of a thinner bimetal blade? After using this one and seeing how much longer it lasts, I'm sold.