Results 1 to 5 of 5

Thread: Problem with printing icon on corel draw

  1. #1
    Join Date
    Oct 2010
    Location
    Pendleton,NY
    Posts
    82

    Problem with printing icon on corel draw

    I have a layout on corel screen and want to send it to the laser. The print icon on the top of the page is not highlighted so i cannot print it. Check other layouts and this is the only one where the printer icon is not highlight. Im sure its an easy fix just need some direction. First time i eve had this issue.
    Tom Sieczkarek
    Cutting Light Custom Laser Engraving
    Epilog Helix -60 watts
    Sandblasting Cabinet
    Various wood working equipment

  2. #2
    Can you copy the file to a new page and get the print icon?
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Gravograph IS400
    Woodworking shop CLTT and Laser Sublimation
    Dye Sublimation
    CorelDraw X5, X7

  3. #3
    Join Date
    Nov 2006
    Location
    Maple, Ontario, Canada
    Posts
    1,010
    In object manager do you have it as visible but disable printing?
    Trotec Speedy 300 - 60w, with Quatro CSA-626 fume extraction
    Xenetech 1625 x2,
    New Hermes TX pantograph, CG4 cutter grinder
    Brady Globalmark2 label printer,
    Assortment of custom tooling , shears & punches, heat bender.
    Software: Xenetech XOT, Corel X3, Bartender label software

  4. #4
    Join Date
    Nov 2007
    Location
    Glenelg, MD
    Posts
    12,256
    Blog Entries
    1
    Are any of the layers with objects on them set to print in the Object Manager? I've done that to myself once or twice... turned off printing for all layers, then wondered why nothing prints.
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press

    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5

  5. #5
    Join Date
    Oct 2010
    Location
    Pendleton,NY
    Posts
    82
    Thanks to all....The object manager was turned off on the desktop that was the problem. I was still sweating it out though, as I had lot of time on this layout. Never happened before, now I know where to look.
    Thanks again,
    Tom
    Tom Sieczkarek
    Cutting Light Custom Laser Engraving
    Epilog Helix -60 watts
    Sandblasting Cabinet
    Various wood working equipment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •