I am considering getting one of these as my Christmas present from my wife(neither of us are into surprises anymore ), and I am a bit confused on the differences between the Bevel Up Smoother and the Low Angle Smoother.
As near as I can tell the BUS (@$219) is 1/4 inch wider blade, but is not milled to be able to use it for shooting and the LAS (@$189) is milled for shooting. Is there something else I am missing, I would think the extra machining would be more than the wider blade and body. Or should I just go with the Low Angle Jack with the 2 1/4 blade and milled for shooting for the same dollars as the BUS.
Thanks
John