Just finished this piece in between other work. The intent was to see how much dimension could be achieved in minimal depth, in this case less than 1/8". I also wanted to create a three dimensional painting without the carving looking like it was painted. The material is basswood measuring 22" x 7".
The finish is also a radical departure from my norm. There are three different shades and types of stain used plus acrylics, watercolors, lacquer, shellac and waxes. I used a spray gun, airbrush, paint brushes and rags to achieve the look. It was not easy to avoid the shiny look and to avoid getting to "painterly". It was quite an experiment and one that did not turn out to rough. Hope you enjoy it.
Mark
www.stromcarver.com
wcrabbit1.jpg