I may take a swing at cutting aluminum on my Camaster and need to put a couple 100 degree countersinks in the material. Any leads on what bits would be good for this using the cnc?
I may take a swing at cutting aluminum on my Camaster and need to put a couple 100 degree countersinks in the material. Any leads on what bits would be good for this using the cnc?
CAMaster CR-408 Cobra X3
Severance Tool makes really good countersinks. Look at their chatterless countersinks. They are available in 100 degree.
http://www.severancetool.com/2764/index.html
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.