Ha!!! Yeah I was very ill at the time...drug induced no doubt! I'd stick 1/4 to 1/3 in the lid. My lids are usually 1/2" thick so I'll stick 1/4" of the pin in the lid. Thanks for pointing that out
Ha!!! Yeah I was very ill at the time...drug induced no doubt! I'd stick 1/4 to 1/3 in the lid. My lids are usually 1/2" thick so I'll stick 1/4" of the pin in the lid. Thanks for pointing that out
Your Respiratory Therapist wears combat boots
I am interested in the link as well Jim.
TIA.
I'd appreciate your tutorial as well Please.
Thanks.
NOTE - This thread was last posted to more than 10 years ago before these three recent posts requests for a link
Hi Jim!
Can I get that link as well?
Thanks
T
And, Jim Burr hasn’t visited the creek since 2014!!!!!
I am pretty sure he is not going to respond to these requests.
Left click my name for homepage link.
So does anyone have his plans? Or other tips and tricks to line up the magnets? Obviously it's a relevant topic.
For anyone else looking, googling jim burr hinge salt box got me to what I presume is the tutorial he mentioned all those years ago.
I believe we aren't allowed to post links to other forums, but my search found his tutorial was posted on Family Woodworking (mods if this isn't allowed please act accordingly). I also found an Intractable that gives a decent description of techniques I've used before. If this link isn't allowed, please remove it:https://www.instructables.com/Salt-C...agnetized-lid/
Maria
A woodchick can chuck wood
This video also shows several methods of lining up the pivot points. https://www.youtube.com/watch?v=azWl...nnel=MikeWaldt