Results 1 to 5 of 5

Thread: Help with art

  1. #1
    Join Date
    Mar 2007
    Location
    St. Tammany, Louisiana
    Posts
    178

    Help with art

    Well, I finally got a car show at a fair that I have been doing for 4 years. Maybe the 5th year I will get the trophies for running event.


    They want 7X9 plaques red alder or using metal plaque plate. The art they gave me sucks! Can you take a look , what font is in the circle and what would you do with the leaves???
    Attached Files Attached Files

  2. #2
    Hi Sal,

    Could it be something like this one with different shades of grey ?

    Regards,
    Hannu
    Attached Files Attached Files
    GCC Spirit GX 60W, 600 Series LLC 60W, Corel 11/X3, Illustrator, Autocad 2004, etc...

  3. #3
    Join Date
    Oct 2005
    Location
    Moreton, Wirral, UK
    Posts
    3,287
    Sal these should do it for you, just unzip them using winzip or similar.
    Attached Files Attached Files
    Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender


  4. #4
    Join Date
    Mar 2007
    Location
    St. Tammany, Louisiana
    Posts
    178
    Thank you both, Frank, how did you get rid of all the lines?

  5. #5
    Join Date
    Oct 2005
    Location
    Moreton, Wirral, UK
    Posts
    3,287
    Sal I went through the drawing and just removed the differences in the colours (that took a while) made them all one colour. Then I made another one in greyscale and you might notice that I altered the colours on those otherwise the colours appear to be the same shade of grey. So a little bit of jiggery pokery and you have the results. Then I traced them to get you eps files.
    Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •