Are FRP (Fiberglass Reinforced Panels) able to be cut and engraved with a laser?
Thanks,
Are FRP (Fiberglass Reinforced Panels) able to be cut and engraved with a laser?
Thanks,
Larry Folk
LEF Architects, LLC
The Historic Model Aircraft Company
Epilog 24x12 75 watt
Roland GX-24
Corel X4
MicroStation CADD Software
Rhino w/T-Splines
SketchUp 8 Pro
Larry read this the other day might help http://www.sawmillcreek.org/showthread.php?165788-Fiberglass-(raw-material-and-epoxied)&highlight=Fiberglass+Reinforced+Panels
Craig Matheny
Anaheim, Ca
45 watt Epilog Laser, 60 watt Epilog Laser,
Plasma Cutter, MiG Welder
Rikon 70-100 Lathe
Shop Smith V510, To many hand Tools and
Universal Repair Kit (1- Hammer and 1- Roll of Duck Tape)
Hey Larry,
Not sure how yours will react but my 60 watt engraved it nice but charcoal city when trying to cut it. I guess it is the glass and resin that chars the edges. tried several options with power and speed, multiple passes at a low power low speed and high power at a high speed. None worked satisfactory. I passed on using the laser, which would have been a nice job, quoted using the CNC which increased the price and I missed it but they will keep my name on file if they have a different material job. I was also told that you will need to clean your laser frequently because the fumes will coat your interior and may cause issues later if not cleaned well.
Have a Blessed day,
Michael Kowalczyk
Laser-Trotec Speedy II 60 watt with 9.4.2 job control and will soon upgrade to JC X
Corel Draw Suite X6, FlexiSign Pro 8.62, AI CS3 and Lasertype6
CNC Routers-Thermwood model C40 with 4th axis. Thermwood Model 42 with dual tables and dual spindles with ATC for high production runs,
ArtcamPro 2010_SP4, EnroutePro 5.1, BobCad v21 & v24, Aspire v8 and Rhino 5.
FOTC link
http://www.sawmillcreek.org/friends.php?cp=210&lp=0&t=0&q=