Need to order some square drive screws, what coating do you find most useful. To many choices for me to make up my own mind. Most use would be furniture and wood is maple. Thanks.
[OP]
Member
Need to order some square drive screws, what coating do you find most useful. To many choices for me to make up my own mind
Sometimes we see what we expect to see, and not what we are looking at! Scott
Contributor
I use Antique Bronze fwiw
If its for furniture assembly I assume they will not show. I use dry lube steel. Decorative screws are brass or brass plated steel.
"A hen is only an egg's way of making another egg".
– Samuel Butler
[OP]
Member
Thanks Curt and Glenn. Any preference for fully threaded or partial threaded screws ?
Sometimes we see what we expect to see, and not what we are looking at! Scott
Moderator
I typically buy the yellow zinc for general purpose use. I do use some of their stainless products; not necessarily because I need stainless, but because the particular size and format I use on my tack trunk projects is only available in stainless.
--
The most expensive tool is the one you buy "cheaply" and often...
Posting Permissions
Reply With Quote