Hi All,
I need some ideas for outdoor plaques about 6x6 or 7x9 that I can make with a laser engraver. I have a customer that will be giving me continuous orders but I have to send him samples with prices.
Thanks,
Tony
Hi All,
I need some ideas for outdoor plaques about 6x6 or 7x9 that I can make with a laser engraver. I have a customer that will be giving me continuous orders but I have to send him samples with prices.
Thanks,
Tony
Corian... 'nuff said.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Tony
There are other outdoor plastics from Rowmark and IPI that can be mounted to a suitable plaque backing to produce quite good results. Take a look at the Rowmark and Johnson Plastics web sites for ideas.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Thanks All. I was leaning toward corian but wanted to see if there were any alternatives.
Tony,
If you decide to go with Glacier white Corian your material cost per 6" by 8" plaques will be less than $5 per plaque based on the wholesale price I pay from my local distributor.
.