Results 1 to 5 of 5

Thread: outdoor plaques

  1. #1

    outdoor plaques

    Hi All,

    I need some ideas for outdoor plaques about 6x6 or 7x9 that I can make with a laser engraver. I have a customer that will be giving me continuous orders but I have to send him samples with prices.


  2. #2
    Join Date
    Nov 2007
    Glenelg, MD
    Blog Entries
    Corian... 'nuff said.
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press

    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5

  3. #3

    There are other outdoor plastics from Rowmark and IPI that can be mounted to a suitable plaque backing to produce quite good results. Take a look at the Rowmark and Johnson Plastics web sites for ideas.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

  4. #4
    Thanks All. I was leaning toward corian but wanted to see if there were any alternatives.

  5. #5
    Join Date
    Feb 2003
    Hayes, Virginia

    If you decide to go with Glacier white Corian your material cost per 6" by 8" plaques will be less than $5 per plaque based on the wholesale price I pay from my local distributor.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts