Results 1 to 2 of 2

Thread: Monogram

  1. #1
    Join Date
    Oct 2004
    Location
    Seattle eastside
    Posts
    10

    Monogram

    I'm designing an urn for my mother and looking to source a monogram with her initials, similar to the one shown - maybe for veneer inlay, or open to other materials. Any recommendations and/or sources?

    I posted in the Woodworkers forum and got some veneer source ideas, but looking for other possibilities.

    Thanks....

    monogram 2.jpg

    monogram 4.jpg

  2. #2
    Join Date
    Oct 2005
    Location
    Moreton, Wirral, UK
    Posts
    3,287
    Charlie, assuming this is a wooden urn, there is nothing to stop you doing the top one in acrylic. You could spray the oval black, then engrave through the black and spray engraved area in white. Engrave the oval shape deeply into the urn and then inlay the oval shape into the wood for a smooth finish. The black will give it a really deep appearance and the white will project itself forwards almost 3D.
    Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •