I have one of Jet's cannister dust collectors - the most common(I'm assuming) 1.5 HP one. I've always been rather disappointed with how often I have to remove the cannister and shop vax out all the chips that lodge in the folds. Well it seems I'm not the only one, and Jet has now come up with a baffle to take care of the problem. Trouble is, Jet refuses to offer a retrofit kit to add the baffle to my existing Jet DC (I called Jet customer service as was told, they considered it, but decided not to). In my book, that's terrible customer service. I'll personally think long and hard about whether to buy any more Jet equipment. I have the ceiling mount air filter, a 1642 lathe, and tons of Powermatic (same company) stuff - TS, BS, mortiser, etc. If this is how they're gonna treat me when they come up with improvements for products they put out that are lacking, I think I'm looking elsewhere next time. Here's the details on the CONE offering for anyone who might have missed it:
http://content.jettools.com/vortexco...e-brochure.pdf