How many chucks are to many?

[Curt Stivison]

I now have 7 chucks. 4 Nova G3, 2 Super Nova, 1 old Nova. I was told by a Creeker that we all know and love that I may be close to having enough. How many is to many?

[Jon Lanier]

How many is enough? I've got no idea...I own one. If you are looking to give any away. Feel free to PM me.

[Mike Rushing]

I have one and wish I had at least two more. Just never around when they come up for sale

[John Keeton]

I feel so ashamed!!! I have enabled an addict!!!!

[David E Keller]

Ridiculous! There's no such thing as too many chucks! What if my wife were to see this post? Come on man...

[David DeCristoforo]

Once you get up around fifty, you might want to think about backing off a bit...

[Scott Lux]

If you have so many chucks that the combined weight of them is pulling the moon from it's orbit, you probably have enough. Just barely. That being said I have two. Unless you count a drill chuck, then I can add one.

[Bernie Weishapl]

I didn't know that you could have to many.

[Gary Max]

Looks like you need a Titon---- don't forget the 5 inch jaws

[Steve Kubien]

I have 3... a nova midi and 2 SN2's. I could easily justify another big one like the Vicmarc 120 or the big Oneway if I had a lathe in the 20+" range. As it sits, any more would be extravagant for me. I would love another 6-8 faceplates though!

[Donny Lawson]

It's nice to own so many chucks.,but you can only use one at a time.

[John Keeton]

It's nice to own so many chucks.,but you can only use one at a time.

Oh Donny!!! Not so!! I often have two chucks with parts in them, and using a third chuck with soft jaws or pin jaws, all on the same multi-piece turning. Just keep changing chucks on/off the lathe.

[jeff schnell]

you never have too many, I have 2 strongholds, 2 talons, 2 psi baracudas, mico chuck, also 5 or 6 metal lathe chucks just in case, oh yea an axminister, I would like a few more strongholds to have all of the different jaws already on and don't have to swap them.

[curtis rosche]

you can send one my way if you want i only have one, a little grizzly one.

[David T gray]

humm psi chuck that i use for cole jaws upto 14'' then 3 grizzlys for every thing small with vicmarc jaws then the oneway with a lot of jaws then there's vacuum chucks 7 total with vacuum ones.