I built this bookcase earlier this winter http://www.sawmillcreek.org/showthre...case&highlight= , thought it might be nice to build a desk to go with it. I impemented most of the styling of the bookcase into the desk. The top is burl oak with an inlay banding. I applied shellac to the banding and inlay so I could stain the rest of the top, filled the grain and topcoated with water borne laquer.
I'm a little concerned with the cpu compartment though, it seems to get pretty warm when the door is closed for a few hours. The back has several 5/8" vent holes drilled but I'm concerned its not enough to keep the cpu cool. Any suggestions for further venting would be appreciated.
desk (1024 x 768).jpgcpu (1024 x 768).jpgside (1024 x 768).jpgtop (1824 x 1368).jpg