John, wonderfully done, and greatly appreciated, I picked up a few pointers, mainly on the leather hone and felt wheel.

Something I'll add, I started using my WS3K on chisels, and using just the standard abrasives worked OK for me on bench chisels. Then I started acquiring bench planes, and couldn't get the irons sharp enough. So, I ordered the micro-mesh abrasives by worksharp.... Man of MAN what a difference! The micro-mesh discs bring the bevel to a mirror finish, much like I'm sure the leather hone & felt wheel method do. I have the leather hone and felt wheel, and am going to try that method for final finish, the hone & felt will easily last longer than the micro mesh discs.

Thanks!