a youtube vid I did of the guard http://www.youtube.com/watch?v=Hz-Kc-9k5uQ
It's an old video from my old tablesaw, but the issue and volume number are on the title
a youtube vid I did of the guard http://www.youtube.com/watch?v=Hz-Kc-9k5uQ
It's an old video from my old tablesaw, but the issue and volume number are on the title
Husband to 1, father to 9
2 girls and 7 boys (in that order)
Life Is Full Of Blessings
The Lord is my Rock and my Refuge.
I agree with those that said an overhead guard would a much bigger difference dust collection wise than either of the saws mentioned would. Yes any cabinet saw will be better than a contractor saw, unless you have done some modifications to it for dust collection. What I did for my Ridgid contractor saw made it very close to a cabinet saw for dust collection.
Both the Griz 1023R series and the Saw Stop have the blade shroud, as do the PM2000, and maybe some others as well. The 691 does not, but I haven't had any problems with dust collection from the cabinet. It doesn't spew out of the cabinet. Again I have an overhead guard for safety, that incorporates a 4" line for dust collection. I also enlarged the cabinet collection port to 6" and have a cyclone that generates enough CFM to handle all of this.
I'd say get the Griz saw you like best, use some of the money to buy or build an overhead dust collector/guard, and maybe some to get a little better dust collector if what you have can't handle both hook ups well enough. Jim.
Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
Home of Irish Setter Rescue of North Texas.
No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
Member of the G0691 fan club!
At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.
A true riving knife would be nice. I look at the sawstop everytime i'm in woodcraft. They really designed this thing well. The insert pops right out and the nice lever quickly releases the riving knife. Integrated dc in the riving knife and safety. It's got it all.
Well, as it turns out, Adrian lives about 10 minutes or so from me! He PM'd and emailed me and we got together here at the shop. Not sure I can say which way he will go, but he got to see a Grizzly first hand, which is hard to do for most of us.
And no, I have no proof. LOML was taking a nap, and with the Chemo she's been going through, just wasn't up for company. Next time we'll get a picture, I promise. Jim.
Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
Home of Irish Setter Rescue of North Texas.
No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
Member of the G0691 fan club!
At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.
I don't think it's enough said at all. I also don't think that the Chinese made Sawstop is worth anything like what is charged for it. I recently played with one in person, it's a decent shiny Chinese made table saw. It doesn't rip or crosscut a board any better than a Grizzly, and if safety is such a huge concern maybe a persepective SS owner should consider sticking to scroll saw work rather than the "danger" of furniture making ;-)
I will add my .02 A blade shroud makes a big difference in dust collection from my experience. I went from a steel city cabinet saw with the sloped floor like the G0690, to a sawstop PCS with out dust collecting guard. With a small dust collector, (at the time I was using a 1hp delta) almost all the dust from under the blade was collected very little accumulated in the cabinet. Compared to the steel city that needed to be vacuumed out every so often because it would start to built up in the corners and eventually filled up an dust collection wasn't as effective. I have never needed to vacuum out my PCS cabinet it never has more than a small amount of dust in it. The top of the table on the SS did stay cleaner due to suction closer to the table as well. The new blade guard arrived in the mail about 1 year later. Using the blade guard for most cuts that the blade is totally inclosed results in very very little dust comming from the saw. If you are doing trim cuts, where the blade is exposed some dust is spewed out from under the guard. I also was giving the opportunity to test a "shark guard" against the sawstop blade guard (below is a link to my review and comparison of each).
From my experiences if the brake on the SS, and premium fit and finish means nothing to you, stick with a grizzly saw, there are very well regarded and add on a "shark guard" this will get you much better dust collection that you are experiencing with a conrtactor saw. But for $1500 extra you can buy a premium saw with better dust collection (IMHO) than you will achieve with add ons to a grizzly, and a 2nd to none saftey option. It is a one time purchase with either saw you shouldn't need to replace them in your lifetime, with proper care and maintenance. Until that next NEW gotta have feature is designed, patented, and marketed.
http://www.sawmillcreek.org/showthre...uard&highlight=
Last edited by Paul Ryan; 01-16-2011 at 12:03 PM.
Thanks everyone for the help, and especially Jim for giving me a first hand look at his Grizz!
Looks like I'll be ordering my own bear this week! Yahooo
You should check out some of our saws! www.lagunatools.com
Has anyone witnessed the PM2000's dust collection? It also has a shroud if memory serves.
Laguna, I, for one, did look at your offering of this same saw online. In fact it was what made many of us question Grizzly about what type of motor the 690/691 came with and found out it was the Leeson also. There are a couple differences between the 2 offerings. Though minor, one specifically addresses Adrian's original priorities. The Laguna comes with an extruded piece of aluminum to make the miter gauge easier to work with longer pieces of wood. In fact, I've been looking for a piece that I could add to my Grizzly miter gauge to do the same thing. The other difference is that the Laguna doesn't, or at least didn't (please let us know if this has changed) come with the short riving knife, only the splitter/guard that only works on through cuts. Of these two differences, the short riving knife was very important to me. I use a sled for most all of my precision angle cuts on the TS, so while nice, the aluminum extrusion for the miter gauge was not critical. The short knife was mandatory. Jim.
Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
Home of Irish Setter Rescue of North Texas.
No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
Member of the G0691 fan club!
At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.
It does have a blade shroud, I used to own a PM200 and I'd say the dust collection was quite good, especailly compared to a contractor saw. There was always alot of dust buildup in the bottom of the cabinet though. I'd vacuum it out
every month or two, but there were times where I had 2" or better piled up. I did read from other owners that had the same experience with the buildup.
I own a PM2000 and the dust collection is excellent. Like Jeff said there will be some dust left in the cabinet, that cannot be avoided as the shroud cannot totally capture all the dust. No shroud can. It's really not that big of an issue, just open the hinged door once a week or month and vacuum out the cabinet.
I went with the Grizzly 1023 because of the blade shroud, and yes the short riving knife was my first priority.
Get this. I placed the order Tuesday Afternoon and UPS just called and said they are bringing it tomorrow (Thursday). That's less than 48 Hour Service!! Gotta love that.