So Frank with all that new white material on the ground have you found a way to mark it with your laser. :>)
Hope you and yours are safe and warm.
JIM J.
So Frank with all that new white material on the ground have you found a way to mark it with your laser. :>)
Hope you and yours are safe and warm.
JIM J.
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.
Thanks Jim. Actually where we are we have been fortunate as usual from the rest of the country. We had snow but only about a quarter of an inch of it here, most has disappeared because we have had up until yesterday, blue skies and sun! There is a bit of ice on the ground here and there and it's slippery of course because it can't thaw out now and temperature is remaining at 0c day time and -5c night. So all in all, not bad at all, sunbathing is a bit of a pain and gets a little nippy.
Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender
Well, it looks like you've put on a nice winter coat for the season, just try not to shed everywhere, especially if you have dark furniture.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
We got about 12 inches in East London. Lucky I've got a week off work as I finally got my laser!
Jit Patel
London UK
30w Trotec Speedmarker CL (Galvo) with 400mm & 250mm lens
80w Trotec Speedy 400 with Rotary, Vacuum Table, Cutting Lamellas, 2" & 1.5" lens, Pass through
Oki Printing Press
Abobe Creative Suite - Illustrator, Photoshop, InDesign.
Vector Magic
[SIGPIC][/SIGPIC]Camaster Cobra 408 working table size 48 x 98
Wincnc,AspireII,PhotoVcarve,Cut3D
HX6090SE 60Wworking table 23”X36”
LaserCut 5.3
Coreldraw X3, photograV 3.0, Photozoom3
Sawmill Creek is financed in part through member contributions.
Many members just like you have found extraordinary value in becoming a financial supporter of SMC.