Hi has anybody ever tried the chinese Laser Jcut 4060 or Similar machine. I need to replace my existing machine, and was wandering about those. Are they a lot worse for a small production shop that only uses it several times a week.
Hi has anybody ever tried the chinese Laser Jcut 4060 or Similar machine. I need to replace my existing machine, and was wandering about those. Are they a lot worse for a small production shop that only uses it several times a week.
I can't see them as being any different than the million other Chinese machines, considering they all share the same two to three designs and software packages. Plenty of info on Chinese machine pros/cons if you do a search here...
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5