Need design, modeling advice for this.
Wood tiles will be 12x12 cut from .875 thick stock.
Thanks for any direction.
Gene
Need design, modeling advice for this.
Wood tiles will be 12x12 cut from .875 thick stock.
Thanks for any direction.
Gene
Creative Woodwork and Design
Vector Studio 22
Gene,
I think you can have the texture function in VCarve or aspire follow vectors that you create.
I think there was a post on something similar recently there..
I will see if I can find it.
Nick
looks like you posted on that thread its been a little while........
Last edited by Bruce Page; 09-10-2010 at 3:32 PM. Reason: Removed forum link. Links to other public or private forums are not allowed
enroute 4.1 has a texture function which makes this very easy.. much better than any other program out there, including artcam or aspire for this function. Also, some programs like Rhinocam can engrave 3d curves that you have created manually to achieve this result.
I took a simple approach. Hopefully the attachment will be OK.
that is probably the best i have seen. i started copy and paste to get a larger panel and got an assprtment of results all good!!
Last edited by james mcgrew; 09-10-2010 at 4:22 PM.
I posted something similar here.
http://sawmillcreek.org/showpost.php...64&postcount=3