Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
James, what did you find? Can you put a product name or link to it. It's an old thread but I am looking for a very similar thing, a 6" "upblast" with dampers.
The closest I've found is here,
https://airhand.com/product/up-blast...last+Stack+Cap
Seems like the recommendations are to get it up pretty tall (6'). But I really did not want to use guy wires.
I cut tons of latex and have yet to find anything as disgusting and likely to make new enemies. I vent out the window in the dead of night and slide out of there before sun-up. My new neighbor downstairs happens to be a night owl too which messes up my entire operation. He brought me down to his unit to experience the hell I had created in his workshop. it was horrendous. The airflow must be going out my pipe and the negative pressure or window unit pipes it right back in downstairs. I also suspect that latex particulate is heavy and it sinks like a thick fog possibly even through the floor. it was 2x-3x worse in his workshop than mine. I imagine filtering sticky nasty latex is financially bonkers but I will say that fine tuning my settings for each color, thickness and mfr. of latex sheet has made a monumental impact. we now aim to just barely get thru with the lowest possible power and add a 10 min. blow-out before cracking the lid open. My neighbors still hate me. I need a 4" coupler for a stargate to solve this. :/
Trotec Speedy 360 80watt, Woodworking, screenprinting, paper marbling and an all around assortment of art supplies.
I make art, my laser makes money. which i spend on art tools like lasers.
MAKE it 'til you make it.
My exhaust is simple , its a 6 inch metal pipe(woodworking dust collection piping) with a 6 inch blast gate just before the fan exhaust
and i have a 90 degree at the top, goes up the side of my shop and has a course mesh at the opening (birds were trying to next)
No rain works very well ---i have 2
ya'll relize this thread is 8 years ols right
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander