Results 1 to 7 of 7

Thread: Color filling glass

  1. 06-10-2010, 8:10 AM #1
    Garrick David
    Garrick David is offline [OP] Member
    Join Date
    Dec 2009
    Location
    Gainesville, Florida
    Posts
    49

    Color filling glass

    Does anyone have a technique they wouldn't mind sharing for color filling on glass?

    I have some glass plates that will be used for a home show and I thought it would be nice to color the laser etching with gold, but I can't get any kind of consistency with rub n buff. Any suggestions?
    Garrick D. Crocker
    Gainesville, Fl

    PowerSharp 16 w/rotary
    Corel X3
    Zenbot, Mach 3, VCarve
    48" ValueJet, 54" Vinyl Cutter
    Reply With Quote Reply With Quote
  3. 06-10-2010, 8:42 AM #2
    Andrea Weissenseel's Avatar
    Andrea Weissenseel
    Andrea Weissenseel is offline Contributor
    Join Date
    Nov 2008
    Location
    Aachen, Germany
    Posts
    444
    Thermark has a color "bronze" for glass and ceramics. By adjusting the settings and coat thickness you can reach a golden look

    Andrea
    _______________________________
    LaserPro Spirit 40 W
    OKI ES9431

    Who wants to hear the bells must pull the rope
    Wer die Glocken hören will muss am Seil ziehen
    Reply With Quote Reply With Quote
  4. 06-10-2010, 10:25 AM #3
    Viktor Voroncov's Avatar
    Viktor Voroncov
    Viktor Voroncov is offline Member
    Join Date
    Feb 2010
    Location
    Vilnius, Lithuania
    Posts
    341
    Andrea, did you reach good looking bronze with Thermark? All my tries ended with dirty-bronze color
    GCC Dealer in Baltic countries
    Reply With Quote Reply With Quote
  5. 06-10-2010, 11:47 AM #4
    Dan Hintz's Avatar
    Dan Hintz
    Dan Hintz is offline Member
    Join Date
    Nov 2007
    Location
    Glenelg, MD
    Posts
    12,256
    Blog Entries
    1
    I simply mask with transfer tape, laser through, and spray with my favorite color of spraypaint. See this thread for a pic of a gold dragon on black glass...
    http://www.sawmillcreek.org/showthread.php?t=123614
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press
    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5
    Reply With Quote Reply With Quote
  6. 06-10-2010, 2:23 PM #5
    Garrick David
    Garrick David is offline [OP] Member
    Join Date
    Dec 2009
    Location
    Gainesville, Florida
    Posts
    49
    That is the perfect way for me to go with this (mask, engrave, paint).

    Thank you!!!
    Garrick D. Crocker
    Gainesville, Fl

    PowerSharp 16 w/rotary
    Corel X3
    Zenbot, Mach 3, VCarve
    48" ValueJet, 54" Vinyl Cutter
    Reply With Quote Reply With Quote
  7. 06-10-2010, 2:53 PM #6
    Dan Hintz's Avatar
    Dan Hintz
    Dan Hintz is offline Member
    Join Date
    Nov 2007
    Location
    Glenelg, MD
    Posts
    12,256
    Blog Entries
    1
    Garrick,

    I just noticed you're in G'ville... I lived there for 17 years (left in '97), and I'll be there next weekend for my high school reunion, visit the parental units, etc.
    Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )

    Trotec 80W Speedy 300 laser w/everything
    CAMaster Stinger CNC (25" x 36" x 5")
    USCutter 24" LaserPoint Vinyl Cutter
    Jet JWBS-18QT-3 18", 3HP bandsaw
    Robust Beauty 25"x52" wood lathe w/everything
    Jet BD-920W 9"x20" metal lathe
    Delta 18-900L 18" drill press
    Flame Polisher (ooooh, FIRE!)
    Freeware: InkScape, Paint.NET, DoubleCAD XT
    Paidware: Wacom Intuos4 (Large), CorelDRAW X5
    Reply With Quote Reply With Quote
  8. 06-10-2010, 2:57 PM #7
    Garrick David
    Garrick David is offline [OP] Member
    Join Date
    Dec 2009
    Location
    Gainesville, Florida
    Posts
    49
    My wife and I will be on vacation from the 17th - 28th, but if you need anything at all while you are in town please give me a call. (or if your parents every need anything have them call me.)

    352-246-8825
    Last edited by Garrick David; 06-10-2010 at 2:58 PM. Reason: add info
    Garrick D. Crocker
    Gainesville, Fl

    PowerSharp 16 w/rotary
    Corel X3
    Zenbot, Mach 3, VCarve
    48" ValueJet, 54" Vinyl Cutter
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules