anyone have a idea for paint for romark material. I need to backfill some white lazermax material with red and green letters, but I haven't found these colors from sites like Laserbits. Looking for ideas. Thanks.
[OP]
Member
color fill for romark material
anyone have a idea for paint for romark material. I need to backfill some white lazermax material with red and green letters, but I haven't found these colors from sites like Laserbits. Looking for ideas. Thanks.
Epilog Fusion Fiber 30 watt
Epilog 36 EXT 75 watt
Epilog 36 EXT 60watt x 2
Epilog 32Ex 60watt (new tube, putting out 72 watts)
Epilog Summit 25watt x2
IL-60 2 x 100 watts 60" x 120"
Corel X6
Adobe CS6 Master Edition
"http://www.sawmillcreek.org/friends.php?id=128
Contributor
I would get some acrylic paint from any local craft store. I have used it many times on acrylic and I'm pretty sure it would work fine on Rowmark.
Gary
Contributor
I agree with Gary; that's what I use. However, I've also used solvent-based paints on it with no problems (unlike using it on plexi/pex acrylic).
Longtai 460 with 100 watt EFR, mostly for fun. More power is good!! And a shop with enough wood working tools to make a lot of sawdust. Ex-owner of Shenhui 460-80 and engraving business with 45 watt Epilog Mini18.
[OP]
Member
Thanks for the info guys, I went to Hobby Lobby and picked up some acrylic pens and masked the parts and filled, worked like a charm. Sounded like a dumb question, but it's not part of my routine to backfill parts.
Epilog Fusion Fiber 30 watt
Epilog 36 EXT 75 watt
Epilog 36 EXT 60watt x 2
Epilog 32Ex 60watt (new tube, putting out 72 watts)
Epilog Summit 25watt x2
IL-60 2 x 100 watts 60" x 120"
Corel X6
Adobe CS6 Master Edition
"http://www.sawmillcreek.org/friends.php?id=128
Contributor
I hear very few dumb questions. Naive sometimes, but not dumb. On the other hand I hear a LOT of dumb answers.
Longtai 460 with 100 watt EFR, mostly for fun. More power is good!! And a shop with enough wood working tools to make a lot of sawdust. Ex-owner of Shenhui 460-80 and engraving business with 45 watt Epilog Mini18.
Posting Permissions
Reply With Quote