hello to everyone!
i have gcc spirit 25 watt with standard 2' lens. i have lost manual focus.
can any one tell me the exact length in mm of manual focus.
hello to everyone!
i have gcc spirit 25 watt with standard 2' lens. i have lost manual focus.
can any one tell me the exact length in mm of manual focus.
Last edited by sunil jain; 06-02-2010 at 12:49 AM.
2" = 50.8mm
Am I missing something?
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
The manual focus tool rests on the holder and may be much shorter than 2". On my Trotec it's only about an inch and a quarter though I use a 2 inch lens.
Sunil
Why don't you experiment until you find the right focal point, measure it, and make a tool from acrylic?
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
I will get you the exact measurement of the tool tommorow - its the blue one you looking for?
Rodney Gold, Toker Bros trophies, Cape Town , South Africa :
Roland 2300 rotary . 3 x ISEL's ..1m x 500mm CnC .
Tekcel 1200x2400 router , 900 x 600 60w Shenui laser , 1200 x 800 80w Reci tube Shenhui Laser
6 x longtai lasers 400x600 60w , 1 x longtai 20w fiber
2x Gravo manual engravers , Roland 540 large format printer/cutter. CLTT setup
1600mm hot and cold laminator , 3x Dopag resin dispensers , sandblasting setup, acid etcher
Ah, the focus tool... gotcha! My bad.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Rodne;
Is it the same one which is used on the Mercury? Also need this info as mine is lost somewhere. Thanks
Best regards;
George
LaserArts
At the Indy show in Indy right now but ill be back Sunday and will post the Measurement of mine..
Stanley
LaserPro Sprit 30 Watt...Corel X5..PhotoGrav 3.0
Mercury: The length of the thin portion of the shaft is 55mm.
Explorer :The length of the thin portion of the shaft is 70mm.
Spirit:The length of the thin portion of the shaft is 74mm.
Last edited by Rodne Gold; 06-04-2010 at 3:24 AM.
Rodney Gold, Toker Bros trophies, Cape Town , South Africa :
Roland 2300 rotary . 3 x ISEL's ..1m x 500mm CnC .
Tekcel 1200x2400 router , 900 x 600 60w Shenui laser , 1200 x 800 80w Reci tube Shenhui Laser
6 x longtai lasers 400x600 60w , 1 x longtai 20w fiber
2x Gravo manual engravers , Roland 540 large format printer/cutter. CLTT setup
1600mm hot and cold laminator , 3x Dopag resin dispensers , sandblasting setup, acid etcher
Thanks, Rodne
Best regards;
George
LaserArts
Rodne, thanks for providing measurment.
regards
Sorry, one stupid question; Are you talking about this tool
Regards,
- Hannu
That tool is for the Spirit and the Explorer - they both use the same one - the blue part has a grub screw and can be moved up and down the black shaft - the mercury has a single piece completely metallic blue anodised tool - it isnt adjustable
Rodney Gold, Toker Bros trophies, Cape Town , South Africa :
Roland 2300 rotary . 3 x ISEL's ..1m x 500mm CnC .
Tekcel 1200x2400 router , 900 x 600 60w Shenui laser , 1200 x 800 80w Reci tube Shenhui Laser
6 x longtai lasers 400x600 60w , 1 x longtai 20w fiber
2x Gravo manual engravers , Roland 540 large format printer/cutter. CLTT setup
1600mm hot and cold laminator , 3x Dopag resin dispensers , sandblasting setup, acid etcher
Thank you for the info Rodne, this is something I've been wondering. Since i started with my GCC ( Spirit GX 60W ) I couldn't go through 10mm birch ( with factory settings ). So I refocused it and now I can cut easily 16mm birch... I measured the lenght of my tool and it's 77,5mm. Seems that I have to make some tests with 74mm, maybe I've missed something...
Regards,
- Hannu