Page 2 of 2 FirstFirst 12
Results 16 to 24 of 24

Thread: Removing protective paper from old Plexiglass?

  1. #16
    Join Date
    Nov 2006
    Location
    Innisfil Ontario Canada
    Posts
    4,019
    It must be the same stuff they use to coat eyeglasses to keep them from scratching.. Looking at my reading glasses, it only works for a while
    Epilog 24TT(somewhere between 35-45 watts), CorelX4, Photograv(the old one, it works!), HotStamping, Pantograph, Vulcanizer, PolymerPlatemaker, Sandblasting Cabinet, and a 30 year collection of Assorted 'Junque'

    Every time you make a typo, the errorists win

    I Have to think outside the box.. I don't fit in it anymore


    Experience is a wonderful thing.
    It enables you to recognize a mistake when you make it again.


    Every silver lining has a cloud around it




  2. #17
    Have you tried putting a wet rag on the paper and pressing the rag with hot clothing iron? Steam may release it. Getting the adhesive residue may require the use of an ammonia based cleaner but I have used WD40 for the residue of labels before. I don't know how WD40 will react to plexiglass.
    CW Miller
    Whispering Wood Creations


    I am fond of pigs. Dogs look up to us. Cats look down on us. Pigs treat us as equals.
    Winston Churchill

  3. #18
    Join Date
    Jul 2009
    Location
    Pittsburgh, PA
    Posts
    37

    xylene

    I've tried everything and baby oil and window cleaner to remove it worked for me. It takes some time, so let it soak in.
    Ed
    [SIGPIC][/SIGPIC]

  4. #19
    If these are larger flexible pieces, how about bowing them and holding them in a clamp for a day or two. Perhaps that will help break the bond.

    I'd try protective coating on the concave side first.

  5. #20

    by mistake

    I had some pre cut acrylic to put over photos and the paper was taking forever to get off....so as per usual, I put off the job because it was bothering me. We have had several 80 degree days and I sat down tonight figuring I had a long night ahead of me peeling paper...lo and behold both sides peeled off in one pull. So my thoughts on getting the paper to come off easliy is procrastinate until you absolutely have to do it and hope for some real hot weather.....
    Tim
    Tim Baude
    Legends Awards & Custom Engraving
    Epilog Helix 24, 45w, CorelDRAW X4

  6. #21
    Hi John, you might want to try this product, it's called Maskoff. I have used in the past with good success. I got mine at a local plastics distributor in the area. With a quick google search I found this site.

    http://www.rplastics.com/maskingremover.html

    Be sure to let it soak into the paper for 10-15 minutes.

    -pete
    ULS X-660 60W / HPDFO Optics / Corel X3/X4 / Photograv / Flame polisher

  7. how to remove paper from plexi glass that has aged

    Quote Originally Posted by John McClanahan View Post
    I have a chance to pick up on some aged white plexiglass that still has the protective paper on it. Needless to saw, the paper is stuck to it. Is there anything that will make the paper release? I would like to use it to practice on with my CNC router.

    Thanks,
    John
    I spent a lot of time trying to remove protective paper and tried WD40 , goof off ,GOO gone mineral spirits and razor blade all to no avail or very little progress so I set it aside for a future project . Then i sold a food trailer that had stickers all over it and I asked the guy how did he remove them so quickly and he said he took it to a car wash and used the hot wax setting and they came right off . So I fired up my cheap pressure washer from HF and tried it out and it took it right off!! So give that a try .

  8. #23
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    3,737
    FYI Bob you just replied to an 11 year old topic, New folks just want to post something.... please but check the dates first? PS I take stickers off with my hot air gun, a little heat and they peel right off.
    Last edited by Bill George; 06-09-2021 at 8:37 PM.
    Retired Guy- Central Iowa. , LightObject 40w CO2 Laser and Chiller , WorkBee 1000x750 CNC Router - Mach4 - Windows 10

  9. #24
    Join Date
    Sep 2009
    Location
    Medina Ohio
    Posts
    4,123
    Quote Originally Posted by Bill George View Post
    FYI Bob you just replied to an 11 year old topic, New folks just want to post something.... please but check the dates first? PS I take stickers off with my hot air gun, a little heat and they peel right off.
    That was a good hint as I have a lot of old plexi with the paper stuck on

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •