Thanks for any assistance you can offer. I picked up a 1 hp motor this morning to put on my lathe. It presently had this drum switch and a 1/3 hp rockwell. I had hoped that I could simply match wire colors to make the switch. When the colors on the old motor didn't match and they weren't identified it wasn't as easy as I had hoped. Found some wiring instructions for a drum switch here from 2004 but they didn't work out when tried.
Here is the motor diagram.
2--15-10Wiring Diagrams 001.jpg
Here is the wiring diagram that Marathon emailed me.
wiring diagram.pdf
Here is the switch diagram.
2--15-10Wiring Diagrams 010.jpg
2--15-10Wiring Diagrams 007.jpg
2--15-10Wiring Diagrams 012.jpg
If you can tell me which color wire from the motor goes to which terminal on the switch I can probably handle it.
Thanks again!
Baxter