[OP]
Contributor
i cant remember and i cant seem to find the answer in my search's.
what's the distance between the edge of the door and the edge of the cup for a euro hinge with 1/2 inch overlay on a face frame cabinet.
shewwwwwwww......... i've yet to experiment with scrap, but i figured i'd ask all the experts!!!! love ya mean it!!
cya
brad
The Country Toad Workshop Rogersville, Al
Contributor
The answer depends on which hinge opening-angle and which hinge plate you bought. If you bought Blum and can find part numbers, I can look it up in the the catalog for you. Or you can go swim around the www.wwhardware.com web site, where they have all the Blum mounting info. For other manufacturers, see www.cabinetparts.com.
Member
look for instructions here
http://www2.woodcraft.com/website/e-...ons_local.asp?
Herb
Carrollton, Texas
Whatever you are, be a good one. -Abraham Lincoln
Member
In my experience with concealed hinges 5mm is a good settingOriginally Posted by Brad Hammond
Tom
[OP]
Contributor
5mm...................... gotcha.
thanx all!!
brad
The Country Toad Workshop Rogersville, Al
Member
I use Salice brand. I just set them a little less than 1/8". Never got that metric thing down, don't want to start now.
Even if you don't quite get the right distance, the adjustments in the hinge will compensate for it.
Steve
Member
I use 3mm (1/8") for my Blum 120 degree 1/2" overlay hinges.
Roger
The WoodCrafter
Posting Permissions
Reply With Quote
