Results 1 to 2 of 2

Thread: Dust collector for power carving

  1. #1
    Join Date
    Jan 2010
    Location
    New Jersey
    Posts
    1

    Dust collector for power carving

    Does anyone have plans (or know where I can find some) for a collector to be used for power carving, etc?

    Also does anyone have experience and/or recommendations to purchase one?

    It doesn't seem like it should be that difficult to make.

    The commercially available ones look like they're a lot of money for a simple product.

    Thanks for your help,

    Glenn

  2. #2
    Join Date
    Sep 2008
    Location
    Northern Ontario
    Posts
    22

    Dust collector for power carving

    Take a look at the Woodcarver's ezine, there is an article by Thierry Varem-Sanders that might be of some help to you.
    http://carverscompanion.com/Ezine/Vo...ol3Issue3.html

    There is another type of DIY system at http://www.fishcarver.com/making_a_dust_collector.htm

    GP

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •