[OP]
Friend of the Creek
i had several conversations today about doing another gathering this spring. (yes we will do the BBQ) before i do i would like some input on the interest, we will be gathering in august in atlanta (camaster and sawmill creek at the iwf)
so if there is interest let me know and we will begin planning.
jim mcgrew
Administrator
Spring is a good time for me, another chance to check out your Cobra
.
[OP]
Friend of the Creek
thanks kieth i got a lot of response from the vectric friends so we are on!!
in fact the gibralter solid surface rep wants to donate some ss for us we can get an oven and possibly go further (and do abetter job) on the video i did of you!!
jim
jim
Last edited by james mcgrew; 01-30-2010 at 12:55 PM.
Administrator
YooHoo! Thermal bending!
One of my favorite topics and perfect for CNC projects because the router makes it so easy to build advanced forms. You need both a male and a female form for complex bending.
.
[OP]
Friend of the Creek
i am ready for this!!
i got a pizza oven
jim
Member
I have no idea what you guys are talking about but if there's a pizza oven involved, it's got to be good.
CAMaster CR-408 Cobra X3
[OP]
Friend of the Creek
i am sure kieth will post a pic and show ya!
jim
Member
Forget the pizza! Ask about the BBQ!!!
Keith and JIm this sounds like a neat thing I for one would like to see!
Nick
[OP]
Friend of the Creek
look forward to seeing you again nick!!
Member
I will be on the road until late March but April sounds good to me. Hopefully, I will still have a job then. Either way I will plan on coming up. Looking forward to seeing everyone again.
I hope to make the IWF this year also.
Russ
__________________
Congress is the opposite of Progress
[OP]
Friend of the Creek
russ we always scedule for you!!! look forward to seeing you again as well!!
jim
Administrator
Thermal bending threads.
Circular Desk Signs
http://www.sawmillcreek.org/showthre...hermal+bending
Large cover plates for light fixture
http://www.sawmillcreek.org/showthread.php?t=80098
Bathroom vanity bending
http://www.sawmillcreek.org/showthread.php?t=18923
Ken Dolphs coffee cup - Ken taught me all I know about thermal bending Corian.
http://www.sawmillcreek.org/showpost...5&postcount=17
Last edited by Keith Outten; 01-31-2010 at 11:38 AM.
Member
Those are great projects! The circular desk signs are my favorite.Originally Posted by Keith Outten
CAMaster CR-408 Cobra X3
[OP]
Friend of the Creek
some pictures from october, including sawmills kieth outen!
Member
Jim;
A road trip this spring sounds great - long drive for BBQ, but it was some awfully good BBQ. Thanks for the offer of opening up your shop again - last year was a great learning experience.
Bob
Posting Permissions
Reply With Quote