If anyone knows where I may find RC plans to laser cut please let me know.
If anyone knows where I may find RC plans to laser cut please let me know.
Are you looking for a foam plane plans or a built-up airplane plans?
There are many free foamie plans on the web . . .
ie . . . skyhighhobby dot comm
I'm looking for scale balsa plans, dfx files or .cdr files to cut.
Old hobby mags are full of plans, reduced in size to fit neatly on a scanner. Just trace them in Corel or Adobe and rescale to 1/1 size. Many of the parts are repetitive, so its a snap. You can get these mags by the boxfull at flea markets or on eBay.
Dave
Epilog 35 W 12x24
Adobe Illustrator
Dell PC
Here is a free balsa plan . . . look in the downloads section
manzanolaser dot com
I regret getting rid of my Fine Scale Modeler mags many many years ago... I couldn't afford the shelf space any longer (or the transportation costs with all of my moves!), so they ended up in the recycle bin. No one I knew was interested...
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
try www aerofred com
Machinaria M350 laser engraver
CorelDRAW X3
CorelDRAW 12
PhotoGrav3
You don't specify a scale. Here's a good starting page with a lot of links: http://rcvehicles.about.com/od/aircr...lane_Plans.htm
Good Luck! If you have specific questions feel free to ask me here via PM or e-mail. My primary use is for cutting RC aircraft I've designed.
Allan Wright - Wright Brothers R/C
Laser Engraver: Epilog Legend 24TT 35-watt
Lathe: Delta X5 46-746 - 3HP/220v, 16"x42"
thank you fellas!!
One question, would you guys recommend reinforcing the frames with fiberglass or would that be over doing it?
That all depends on what size plane you're building, what materials you're using, what power system you're using, etc. That's sort of like asking 'what settings should I use with my laser?" without specifying what you're cutting, what you're trying to accomplish, and if you're raster or vector cutting.
If you're interested in a forum where you can get a TON of great information on RC airplanes, try RCGroups: http://www.rcgroups.com/ they have forums for every type of RC aircraft including scale fuel-powered RC, Scale Electric RC, and scale micro RC. Once you settle on exactly what you want to do, you'll find a lot of GREAT information over on RC groups. I come here for laser-related questions, but I go there for airplane design questions.
Good luck!
Allan
Laser Engraver: Epilog Legend 24TT 35-watt
Lathe: Delta X5 46-746 - 3HP/220v, 16"x42"