This is a mahogany tray, 22"x24", built two weeks ago for my daughter. The panel is 14 glued slats. The panel sides are rabbited and glued into dados on the side frames. The panel ends use a sliding dovetail to attach the end frames. The first glue-up away from the side frame is pulling apart on one end.
The glue used for this project is Tightbond Original. One repair thought is to try to open the glue bond on the side frames with heat.
I suspect the 24 pct. house humidity this week as the culprit. Should have floated the whole panel. Shoulda, coulda, woulda....
Appreciate your solutions, guys
Thanks
Bud