Model House Project Available

[Bruce Dillingham]

I have a client who would like a box designed in the shape of their house. It will be used for a card box at their wedding. They are thinking of a size of 24" x 17". (This may be bigger than necessary).The roof will be removed for this and then placed on later.

I have attached a picture of a house that has set their expectations. It is not their house, which is a square modern house that is much simpler. I am looking for someone with these skills to take over this project since it is beyond my capability. The price has not been set and the timing is early spring. I have pictures of their house showing various angles. If you are interested PM me for further further discussion. Thanks

[Kevin L. Waldron]

Bruce,

Chief Architect has a function that will allow you to draw a plan and do a flat foldout for making the model. You might try going to CA forum and asking someone to draw and then you could laser such. Just a thought

Kevin

[Bruce Dillingham]

Thanks for the input. I'll check it out for the future.

I did find a home for the project with a fellow Creeker so I am set for now.