Results 1 to 5 of 5

Thread: 60 Deg bevel on long board

  1. #1
    Join Date
    Apr 2004
    Location
    Comfort, TX
    Posts
    557
    Blog Entries
    1

    60 Deg bevel on long board

    Maybe my brain is passing gas, but I need to cut a 60 degree back bevel (cleat)on an 8ft long board. Of course TS only tilts 45. Any suggestions.

  2. Cut a 30 degree on the other side of the board.

  3. #3
    How wide is the board? You could run it on edge with the TS set to 30.

  4. #4
    Join Date
    Apr 2004
    Location
    Comfort, TX
    Posts
    557
    Blog Entries
    1
    Its 5" wide.

  5. #5
    Join Date
    Apr 2004
    Location
    Comfort, TX
    Posts
    557
    Blog Entries
    1
    Got it Had to stand on side. Didn't feel 100% safe but worked out ok.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •