My original counter top was tile. It eventually got in bad shape and I replaced with treated plywood until I decided what I wanted. It has been on there a year and a half! I always go off on other projects it seems, I have a long list of things I need to get back to.
I figured I would use some of the black walnut I had and make the counter with it.
Overall size is approx 50" by 30". Used Titebond II glue. Finished with Epifanes clear gloss varnish with uv inhibiters.
I need to build a door for the storage area next. Hopefully I will get that done with less delay.
The plywood setup, and a bit of an eyesore:
plywood1.jpg
Counter after last coat of varnish:
counter1.jpg
In place:
grill1.jpg
grill2.jpg
Reply With Quote
